Pumps & Plumbing Hire

Pumps

• 
  1" Submersible Elec NZD $30.00
  Small electric pump, easy to use, self priming, good for small internal floods and little dewatering jobs.
• 
  2" Submersible Elec NZD $45.00
  Versitile and easy to use, this robust pump is great for dewatering footings, pile holes, post holes and surface flooding.
• 
  3" Submersible Elec NZD $70.00
  Easy to use, this robust pump is good for dewatering large areas of clean water, great for swimming pools or large tanks.
• 
  1" Petrol Pump NZD $30.00
  Small and portable, good when access to the site and power is limited, great on smaller surface floods.
• 
  2" Flexidrive NZD $75.00
  Quick and easy to use this powerful pump, can be used on lots of jobs.
• 
  2" Sludge NZD $50.00
• 
  2" Trash (includes 2 hoses) NZD $45.00
• 
  3" Trash (hoses extra) NZD $70.00
• 
  4" Trash (hoses extra) NZD $105.00
• 
  6" Trash Pump NZD $300.00
  Auto primed, 100lt per/sec flow rate, solids handling 77mm, 24 hours running and able to be run dry, great when streams and sewer lines need to be by-passed.
• 
  2 1/2" Pump Air Operated NZD $70.00
• 
  Portapump NZD $40.00
  For Pumping Waste Water with Ease from Footings, Trenches, Pits and Foundations

Hoses

• 
  2" Delivery Hose NZD $12.00
  2" delivery hose standard camlock fittings, normal lenght 10m to 30m.
• 
  3" Delivery Hose NZD $18.00
  3" delivery hose standard camlock fittings, normal lenght 10m to 30m.
• 
  4" Delivery Hose NZD $25.00
  4" delivery hose standard camlock fittings, normal lenght 10m to 30m.
• 
  6" Delivery Hose NZD $40.00
  6" delivery hose standard camlock fittings, normal lenght 10m to 30m.
• 
  2" Suction Hose NZD $12.00
  2" suction hose, standard camlock fittings, normaly lengths from 2m to 4m.
• 
  3" Suction Hose NZD $18.00
  3" suction hose, standard camlock fittings, normaly lengths from 2m to 4m.
• 
  4" Suction Hose NZD $25.00
  4" suction hose, standard camlock fittings, normaly lengths from 2m to 4m.
• 
  6" Suction Hose NZD $40.00
  6" suction hose, standard camlock fittings, normaly lengths from 2m to 4m.
• 
  Hose Adaptor NZD $10.00
  Used to bring fire hose into a 3" camlock fitting.
• 
  Fire Hydrant & Key NZD $15.00
  Used to gain water from a hydrant.

Plumbing Equipment

• 
  Chain Pipe Wrench 250mm NZD $20.00
  Tighten and loosen pipe with out damage.
• 
  Chassis Punch NZD $15.00
  Used for punching holes in stainless steel sink tops, normaly used for tap fittings.
• 
  Copper Tube Bender NZD $15.00
  hand bender used to shape copper tube.
• 
  Crimping Tool NZD $15.00
  Used for crimping butline fittings.
• 
  Crox Tool NZD $10.00
  Puts a flange in copper pipe.
• 
  Drain Cleaner (Cable Drum) NZD $20.00
  Used to unblock external drains, good for moving leaves and sediment.
• 
  Drain Cleaner (Rods) NZD $20.00
  Used to unblock external drains, good for moving leaves and sediment.
• 
  Element Spanner NZD $15.00
  Spanner used to fit and remove elements out of hot water cylinders.
• 
  Gas Set (Oxy & Ace Extra) NZD $45.00
  Gas welder used for welding, brazing and cutting.
• 
  Hand Pipe Cutter 2" - 4" NZD $15.00
  Cuts pipe quickly and cleanly.
• 
  Pipe Bender Hydraulic NZD $50.00
  Bends pipe up to 2" in diameter.
• 
  Pipe Die With Handle NZD $25.00
  Put external thread on pipe.
• 
  Pipe Threader Bench Elec 1/2" - 2" NZD $70.00
  Put external thread on pipe.
• 
  Pipe Threader Bench Elec 2"- 4" NZD $90.00
  Put external thread on pipe.
• 
  Pipe Threader Hand Electric NZD $40.00
  Puts external thread on pipe.
• 
  Pipe Vice NZD $20.00
  Holds pipes while working with threader unit.
• 
  Pipe Wrench Stilson 24" NZD $15.00
  Tighten and loosen pipes.
• 
  Pipe Wrench Stilson 36" NZD $15.00
  Tighten and loosen pipes.
• 
  Prestolite Set NZD $20.00
  Helps strip off stubborn paint by heating.
• 
  Tap Reseater NZD $10.00
  repairs and replaces internal thread.
• 
  Waste Master Cutter NZD $25.00
  Punch hole in stainless sinks for waste masters.