Concrete Equipment Hire

Laying

• 
  Alloy screed NZD $15.00
  Comes in various sizes: 0.8m - 3.2m - Used to maintain a consistant floor height during concrete laying.
• 
  Hand float NZD $10.00
  Good for finishing work on edges and corners.
• 
  Bull Float NZD $15.00
  Used to smooth out large areas of concrete ideal for finishing work as it brings liquid to the surface. Essential for floors, driveways and concrete pads.
• 
  Pole Float NZD $15.00
  Used to trowell fresh concrete. Convenient for reaching up to 4 metres using detachable extension handles.
• 
  Concrete Rake NZD $10.00
  Robust contractors rake used to spread wet concrete and raise steel mesh during concrete laying.
• 
  Portable Concrete Mixer Electric & Petrol NZD $30.00
  Lightweight and convenient in the absence of a tow bar or where site access is limited.
• 
  Towable Concrete Mixer 2 cuft - Electric NZD $35.00
  High quality, towable and simple to use. Simply plug in and switch on.
• 
  Towable Concrete Mixer 2 cuft - Petrol NZD $45.00
  High quality, towable and convenient where there is no access to power.
• 
  Pencil Vibrator - Electric NZD $55.00
  Lightweight and portable, used to ensure the consistancy and increase the density of your concrete during laying. Requires an electrical outlet.
• 
  Pencil Vibrator - Petrol NZD $65.00
  Lightweight and portable, used to ensure the consistancy and increase the density of your concrete during laying. Convenient in areas lacking a power supply.
• 
  Power Float NZD $70.00
  Motorised float used to level large areas of wet cement.
• 
  Barrow NZD $15.00
  High quality contractors wheelbarrow, very robust and perfect for concrete layers and landscapers.

Grinding

• 
  Diamond floor grinder - Petrol - diamond head extra NZD $90.00
  Heavy duty concrete floor grinder. Used to remove paint, expose aggregate or lower the gradient of the floor. Fast action speeds through the job.
• 
  Diamond floor grinder electric NZD $170.00
  Lightweight, walk-behind implement for smoothing concrete surfaces, exposing aggregate or removing paint.
• 
  Scabbler, pedestrian - Petrol NZD $50.00
  Used to prepare a floor for another layer of concrete or to lower the contour of a floor. Operates without the need for an air compressor.

Cutting and Drilling

• 
  12" electric hand-held saw NZD $55.00
  This lightweight and user-friendly saw makes short work of metal or masonry cutting tasks. We will provide you with the correct blades for your job.
• 
  12" petrol hand-held saw NZD $65.00
  This lightweight and user-friendly saw makes short work of metal or masonry cutting tasks. Features a hose fitting to reduce dust. We will provide you with the correct blades for your job.
• 
  14" petrol hand-held saw NZD $80.00
  This portable and high-powered saw makes short work of metal or masonry cutting tasks. Features a hose fitting to reduce dust. We will provide you with the correct blades for your job.
• 
  14" petrol saw - pedestrian NZD $90.00
  Great for cutting expansion joints in new concrete. Upright control can save your back and guide arm helps to keep your cutting straight. Cuts to a depth of 100mm (4")
• 
  Masonry drill - inc 1 bit NZD $50.00
  Also known as a Dyna Drill, has a hammer action and is designed to take masonry drill bits from 6mm - 22mm
• 
  Core Drill NZD $50.00
  Heavy duty masonry drill with hammer action. Specifically designed to drill from 20mm - 120mm.
• 
  Core bits up to 75mm NZD $18.00
  Tungsten tipped drill bits to be used with a Core Drill. Perfect for drilling various sized holes through masonry e.g. plumbing and electrical ducting.
• 
  Core bits over 75mm NZD $25.00
  Tungsten tipped drill bits to be used with a Core Drill. Perfect for drilling various sized holes through masonry e.g. plumbing and electrical ducting.
• 
  Diamond Blade 300mm-350mm NZD $40.00
  Hired in conjunction with both hand held and pedestrian concrete cutters. These blades ensure an efficient cut with consistent depth.

Breaking

• 
  Wrecking Bar NZD $10.00
  Useful as both a breaker and a lever bar, making it ideal for both demolition and as a lifting aid.
• 
  Sledge hammer NZD $10.00
  Good quality, hire-proven brands. Ideal for both demolition and landscaping.
• 
  light breaker electric NZD $45.00
  Smallest electric breaker, designed for fine work, ideal for lifting tiles.
• 
  Medium breaker electric NZD $50.00
  Great for more detailed work and confined spaces, easy to set up. Suitable for plaster, concrete and tar-seal demolition in small areas or at shoulder height, e.g. around drain pipes.
• 
  Heavy breaker electric NZD $55.00
  Most popular with contractors. Easy to set up. Suitable for concrete and tar-seal demolition in small to medium areas, i.e. pathways and fence posts.
• 
  Ex Heavy breaker electric NZD $75.00
  Largest electric breaker, easy to set up. Suitable for concrete and tar-seal demolition in large areas, i.e. driveways and concrete pads.
• 
  Hydraulic portable petrol breaker NZD $120.00
  Very portable and convenient. Offers the same breaking efficiency as an air breaker, without the need of a compressor or electricity. Suitable for all all masonry demolition.

Paving and Tiling Equipment

• 
  Brick & Tile Bench Saw NZD $80.00
  Designed to cut bricks and pavers. Comes with a sliding bench and folding legs. A water fitting reduces dust.
• 
  Hyd block splitter NZD $35.00
  Guillotine style cutter, designed for speedy splitting of pavers and bricks.
• 
  Tile saw on bench - inc diamond blade NZD $50.00
  Portable unit, suitable for efficient, precision tile cutting.
• 
  Tile saw - electric hand held NZD $40.00
  Portable tile cutting unit. Suitable for one-off cuts and trimming pre-laid tiles.
• 
  14" diamond blade NZD $40.00
  Cut masonry with precision and speed using this high quality, heavy-duty diamond blade.