Building Equipment Hire

Measuring & Surveying Tools

• 
  Pedometer NZD $20.00
  Quickly measure large areas by walking behind this wheel.
• 
  Spirit level NZD $10.00
  Essential tool for all builders, used to make sure jobs are level. Can even be used to hang pictures.
• 
  Metal Detector NZD $40.00
  Picks up metal by sounding an alarm, can be handy to find all types of metals. Can even help find lost wedding rings.
• 
  Line marker NZD $15.00
  A great tool for marking out lines quickly.
• 
  Moisture Meter NZD $30.00
  Used to measure moisture in timber framing before cladding is put up.
• 
  Measuring Staff NZD $10.00
  Used in conjunction with surveying equipment to ensure an accurate measurement.
• 
  Drainage Laser NZD $95.00
  Gives a working line to guide levels. The modern day string line.
• 
  Laser level NZD $80.00
  A tool to indicate rises and falls across worksites, indicates level by sounding alarm at receiver so can be used by one person.
• 
  Dumpy level NZD $45.00
  Used to measure rises and falls across a worksite, the basic surveying tool.

Fastening Tools

• 
  Finishing Gun - Paslode Impulse NZD $55.00
  The number one tool used to put up skirting, architraves and most fine timber finishing work.
• 
  Framing Gun - Paslode Impulse NZD $55.00
  Fires up to 90ml nails in to framing, eliminates hammering, also great when there is no room to swing a hammer.
• 
  Staple Gun - Electric NZD $25.00
  Used for attaching lighter materal to wooden framing.
• 
  Staple Gun - Hand NZD $10.00
  Great tool for putting up posters, notices and light materal.
• 
  Ramset Gun NZD $22.00
  The ultimate masonry fastening gun. Used to fire up to 120mm nails into masonry.
• 
  Mastic Gun NZD $15.00
  Used to apply cartridged products such as glue, silicon and sealants.
• 
  Banding tool NZD $25.00
  The tool used to strap items together such as posts, pallets and packaging.

Steel Benders and Cutters

• 
  Steel bender/cutter - Electric Hydraulic NZD $45.00
  Used to bend and cut steel reinforcing, cuts back on time and labour costs.
• 
  Steel bender/cutter - manual NZD $25.00
  The construction standard reinforcing cutter bender.
• 
  Bolt cutters NZD $15.00
  Strong cutters that make short work of most steel up to 14mm in diameter.

Clamps and Cramps

• 
  Sash Cramps NZD $10.00
  Large cramps used to hold tight materals that are needing to be fixed together.
• 
  G - Clamps NZD $10.00
  Essental wood working tool, great for holding work together when fastening.
• 
  Floor Cramps NZD $15.00
  The tool used to join tounge and groove flooring while nailing off.

Gib and Fibrolite Equipment

• 
  Fibrolite Cutter - Manual NZD $10.00
  A great dustless method of cutting fibrolite, and cement sheet underlay.
• 
  Fibrolite Cutter - Electric NZD $40.00
  Speed up your job with the dustless fibrolight cutter, also good for cement board underlay.
• 
  Gib Board Stand NZD $40.00
  Save you back with this gib board lifter, lifts gib to your ceiling and holds it in place while you are fixing.

Tarpaulins

• 
  6x9m building tarp NZD $40.00
  High quality building tarps used as temporary cover.

Lino Equipment

• 
  Lino Roller NZD $15.00
  Solid steel drum rollers designed to aid in the laying of lino.
• 
  Lino Lifter - Electric NZD $50.00
  A walk behind lifter, great help with the time consuming task of lino lifting.
• 
  Lino spade (Medium elec breaker extra) NZD $20.00
  A spade fitted onto a electric breaker designed to get under lino to lift in difficult areas

Acrow Props

• 
  Acrow Prop NZD $7.00
  Vertical prop used to temporarily support structures.